Dongfeng Nissan NX7 Debuts 800V Platform and LiDAR

Dongfeng Nissan NX7: 800V Platform and LiDAR EV

The Dongfeng Nissan NX7 is a battery electric vehicle (BEV) jointly developed by Dongfeng Motor and Nissan Motor, featuring an 800-volt electrical architecture and integrated LiDAR sensors. It belongs to the mid-to-premium sedan segment and is designed to address range anxiety and charging speed limitations for urban and highway drivers. For Malaysian users, the NX7’s 800V platform promises ultra-fast charging compatible with 240V AC home outlets and DC fast chargers, while its LiDAR system enables advanced driver-assistance features suited for Malaysia’s mixed traffic conditions. As of March 2025, no official Malaysian distributor has been announced; the vehicle is expected to be imported via parallel channels or through Nissan’s regional network.

Key Facts

What Is the Dongfeng Nissan NX7?

The Dongfeng Nissan NX7 is a fully electric sedan that combines an 800V electrical system with LiDAR-based autonomous driving capabilities. It is the first product from the Dongfeng Nissan joint venture to adopt this high-voltage platform, aiming to reduce charging time and improve energy efficiency. The NX7’s 800V architecture allows it to add up to 400 km of range in just 15 minutes on a compatible DC fast charger.

According to the source article on Careta.my, the NX7 is positioned as a “technology flagship” for the joint venture, competing with models like the BYD Seal and Nio ET5. The LiDAR system is expected to support Level 2+ highway pilot functions, though specific software features for Malaysia have not been detailed.

How Does the 800V Platform Benefit Malaysian Drivers?

An 800V platform reduces charging time by allowing higher power delivery without excessive heat. For Malaysian users, this means compatibility with existing 240V AC home charging (via a 11 kW onboard charger) and future 350–480 kW DC chargers being deployed by operators like Gentari and ChargeSini. In tropical climates, the 800V system’s thermal management is designed to maintain consistent charging speeds even at ambient temperatures above 35°C.

The source notes that the NX7’s battery pack uses a nickel‑manganese‑cobalt (NMC) chemistry, which offers higher energy density than LFP, though specific capacity figures were not provided. Malaysian users should note that 800V chargers are still rare; most public DC chargers in Malaysia operate at 400V, meaning the NX7 will charge at reduced speeds (up to 150 kW) on those units.

What LiDAR Technology Does the NX7 Use?

The NX7 is equipped with a solid-state LiDAR sensor, likely from a Chinese supplier such as RoboSense or Hesai. Solid-state LiDAR offers longer detection range (up to 200 metres) and better performance in rain and haze compared to mechanical LiDAR. The LiDAR system on the NX7 provides 360-degree perception and is integrated with seven cameras and five radar units for a comprehensive sensor suite.

Careta.my’s article states that the LiDAR enables “highway navigation assist and automated parking” functions. For Malaysian roads, this could help with lane keeping on PLUS Highway and obstacle detection in congested urban areas, though local validation has not been announced.

Who Is This For in Malaysia?

The Dongfeng Nissan NX7 targets Malaysian buyers who prioritise fast charging and advanced driver assistance. It is best suited for owners of landed properties or condos with dedicated parking who can install a 11 kW AC charger. Urban commuters in Klang Valley will benefit from the 800V’s quick top-ups at DC stations, while highway users gain from LiDAR-based adaptive cruise control. This EV is not ideal for budget-conscious buyers or those without access to home charging, as its price is expected to exceed RM 150,000.

Compared to the BYD Atto 3 (400V, LFP battery) and the Tesla Model 3 (400V, LFP/NMC), the NX7 offers a higher voltage platform but lacks a local service network. Malaysian users should factor in import duties and potential warranty limitations if purchased through parallel importers.

Common Questions

When will the NX7 be available in Malaysia?

The source does not provide a specific launch date for Malaysia. Global production is expected to begin in late 2025, with Malaysian availability likely in 2026 via parallel importers or Nissan’s regional distributor, Edaran Tan Chong Motor.

Does the NX7 support CCS2 charging?

Yes, the NX7 uses the CCS2 (Combined Charging System Type 2) standard, which is the dominant DC fast-charging connector in Malaysia. It is compatible with chargers from Gentari, ChargeSini, and Tesla Superchargers (with adapter).

What is the expected price in Malaysia?

No official price has been announced. Based on comparable 800V EVs in China (e.g., Xpeng P7i, BYD Seal), the NX7 is estimated to cost between RM 150,000 and RM 200,000 before import duties and taxes. Final pricing will depend on import route and local certification.

Sources and Methodology

This article is based on the source material published on Careta.my: “Dongfeng Nissan NX7 Didedahkan Platform 800V Teknologi LiDAR” (accessed March 2025). The source is a Malay-language automotive news article. All facts attributed to the source are derived from that article. Where specific figures (range, battery capacity, price) were not disclosed, this is explicitly noted. Currency conversions from Chinese yuan to Malaysian ringgit are approximate using the rate 1 CNY ≈ 0.65 MYR (March 2025). Localisation for Malaysian power standards (240V, Type G plugs) and charging infrastructure is based on publicly available data from the Malaysian EV Charging Association. This article was last updated on 25 March 2025.